Dulytek DHP7 Інструкція з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Dulytek DHP7. Dulytek DHP7 12 сторінок. Heat press

INSTRUCTION MANUAL: DHP7

OPERATING INSTRUCTIONS

SETTING

CONTROL

PANEL

(continued)

Dulytek Equipment

www.dulytek.com

5. Press SET button again (Figure 7) to go to the temperature scale

selection mode. Now, you should see "P - 3" on the display (Figure 8).

Tip: Depending on your machine's default settings, you may either see

"F" or "C" on the display, indicating the currently selected temperature

scale (°F or °C).

6. Press UP or DOWN buttons to select either °F or °C (Figure 9) OR skip

this step if you are satisfied with the current selection.

Figure 7

7. Press SET button again (Figure 10) to go to power save mode settings.

You should now see "P - 4" shown on the display (Figure 11). Tip: This

setting controls an automatic turning off the press after a certain period of

inactivity. To resume or "wake up" the press from power save mode, just

touch any button on the control panel.

8. Press UP or DOWN buttons to select the shut off time in minutes (0 to

120 range) (Figure 12). Tip: If you want to turn off the power save mode

altogether, select "0".

Figure 10

(continued)

Figure 8

Figure 11

Figure 9

Figure 12

PAGE 9