Casella Apex2 Польовий посібник - Сторінка 2
Переглянути онлайн або завантажити pdf Польовий посібник для Водяний насос Casella Apex2. Casella Apex2 4 сторінки. Personal sampling pump
Також для Casella Apex2: Польовий посібник (10 сторінок)
Друкувати сторінкуApex2
To turn off the pump:
On the top of the pump, press and hold
and the screen goes blank.
Note: You can't turn off the pump during a sampling run or when a programme
timer is set.
Setup before starting a run
Depending on your sampling requirements you may want to perform one or
more of the following setup procedures before starting a sampling run.
To access the menu items described below:
1. Ensure the pump is turned on, and then press
2. Press
press
Set the flow rate
1. Navigate to SET FLOW, and then press
2. Press
Reset the data
Use this menu item to reset the accumulated run time, motion index and
volume data to zero.
1. Navigate to RESET.
2. Press
or
to highlight the menu item you want to alter, and then
.
or
to change the flow rate, and then press the enter key.
for 3 seconds.
until the countdown has finished
.
2
to display the menu.