Dune HD Duo 4K Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Медіаплеєр Dune HD Duo 4K. Dune HD Duo 4K 16 сторінок. Uhd 4k and hevc enabled iptv/vod/ott media player
USER MANUAL
10
Adjust the player settings as needed using "Setup" menu.
Quick Setting of Video Output Mode
The "MODE" RC button allows quick setting of video output mode without entering
the player setup menu. This way of video output configuration may be required if you
see no picture on the screen after connecting your player to a TV.
Press the "MODE" RC button and then one of the RC buttons "1", "2", "3", "4", or "5"
to switch to one of the following video output modes respectively:
1. Composite PAL
2. Composite NTSC
3. HDMI, 480i, 60 Hz
4. HDMI, 720p, 60 Hz
5. HDMI, 1080i, 60 Hz
After you see a picture on the TV screen, press the "ENTER" RC button, and then go
to the player setup menu to perform a more precise configuration of the video output
mode if needed.
NOTE: The procedure of quick setting of video output mode cannot be used during
playback and in some other cases. To ensure this procedure can be used, switch the
player off, then switch the player on, and then wait about 1 minute to ensure the
player loading is finished. After that press the "STOP" RC button to ensure playback
is stopped. Then use the "MODE" RC button.
Using USB Drives
To use a USB drive, attach the USB drive to a USB port of the player.
The player shows items corresponding to the attached USB drives in the "Sources"
section of the player menu.
When connecting a USB drive requiring significant power (such as USB HDD), use an
external power supply for the USB drive. Power provided by the USB ports of the
player may not be enough for correct functioning of the USB drive.
NOTE: Do not disconnect or switch off the USB drive when some write operation is in
progress.