Freecast CP7039 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Передавач Freecast CP7039. Freecast CP7039 7 сторінок.

Here is the installation instructions for connect the transmitter

to Gopro5 as following:

1. Remove the side cover of the Gopro Hero 5,then install the side cover with screw

holes which provided with this product.

Gopro Hero 5

Remove the side cover :

1. Pin latch release button,

Then open the side cover by

sliding way

2. To pull the cover from the camera

Gopro Hero 5

Side cover

Remove the side cover

2. The side cover with screw hole will be fixed after putting the Gopro Hero 5

into its frame.

3. Insert the Micro-HDMI male connector with screw lock into the Miro-HDMI

female base of Gopro Hero 5. Then put the HDMI screw into the screw hole of

the side cover and tighten it.

4. Insert the Micro-HDMI male connector with screw lock into the Miro-HDMI

female base of transmitter. then put the HDMI screw into the screw hole of

side cover and tighten it.