aevit VIC 2.0 Посібник з монтажу та експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Блок управління aevit VIC 2.0. aevit VIC 2.0 17 сторінок. Voice interactive controls
Друкувати сторінкуVIC 2.0 INSTALLATION
INSTALLATION STep 6
Connect the VIC 2.0 Listen switch to the VIC
2.0 CPU LS port and install the switch in a
convenient location for the client.
INSTALLATION STep 7
Connect the 3.5 mm microphone extension
cable to the MI port on the VIC 2.0 unit and
route the cable to cockpit area of the ve-
hicle. The female end of the cable should be
mounted in a convenient place so the client
can plug it into the microphone.
INSTALLATION STep 8
VIC 2.0 provides the option of using 8 OHMS
MINIMUM external speakers (not included
in the VIC 2.0 kits) instead of wiring into the
vehicle's speakers directly. If external speakers
are used, plug the 3.5mm jack into the SPK
port of the VIC 2.0 CPU. It is recommended
that the Radio Defeat feature still be utilized
even if the external speakers are used.
INSTALLATION STep 9
Re-install the speakers and covers. Turn on the ignition and turn on the radio to ensure that the radio
and front speakers that the Vehicle Speaker and the Radio Defeat Harnesses were soldered to, still
work properly.
3-4
VIC 2.0 INSTALL MANUAL