aevit VIC 2.0 설치 및 운영 매뉴얼 - 페이지 9

{카테고리_이름} aevit VIC 2.0에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aevit VIC 2.0 17 페이지. Voice interactive controls

VIC 2.0 INSTALLATION

INSTALLATION STep 6

Connect the VIC 2.0 Listen switch to the VIC

2.0 CPU LS port and install the switch in a

convenient location for the client.

INSTALLATION STep 7

Connect the 3.5 mm microphone extension

cable to the MI port on the VIC 2.0 unit and

route the cable to cockpit area of the ve-

hicle. The female end of the cable should be

mounted in a convenient place so the client

can plug it into the microphone.

INSTALLATION STep 8

VIC 2.0 provides the option of using 8 OHMS

MINIMUM external speakers (not included

in the VIC 2.0 kits) instead of wiring into the

vehicle's speakers directly. If external speakers

are used, plug the 3.5mm jack into the SPK

port of the VIC 2.0 CPU. It is recommended

that the Radio Defeat feature still be utilized

even if the external speakers are used.

INSTALLATION STep 9

Re-install the speakers and covers. Turn on the ignition and turn on the radio to ensure that the radio

and front speakers that the Vehicle Speaker and the Radio Defeat Harnesses were soldered to, still

work properly.

3-4

VIC 2.0 INSTALL MANUAL