audiophony H11020 Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Мікрофонна система audiophony H11020. audiophony H11020 7 сторінок.

UHF
/
4 - Emet-Body F5
1
2
0dB
INPUT
MIC
-10dB
6
1 - Jack 3.5 input to connect the microphone
4
2 - Input level selector. MIC is the standard configuration for the
3 - ON/STANDBY/OFF power switch. The middle position allows you
STANDBY
ANT
ON
OFF
4 - Battery level indicator.
3
5
5 - Flexible antenna.
6 - Synchronisation IR diode. The ASC (Auto Synchro Connection)
7 - Batteries compartment: LR06 x 2. Please make sure you keep the
7
- 500 MH
headband microphone. You can switch to the 0dB or -10dB
positions if you want to use another type of microphone.
to cut the microphone without interrupting the HF signal.
- The indicator flashes in red when the batteries are discharged.
- The indicator flashes in red when the ASC function is activated.
function allows you to synchronise a chosen channel between the
transmitting microphone and the receiver via infrared transmission.
To do so, select a channel (from 1-16) on the receiver. Press the
ASC button and put the IR diode of your microphone in front of the
IR diode (#9) of the receive
same polarities if need to replace the batteries.
English
11