Consort PLSTi075E Посібник зі встановлення та керування - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник зі встановлення та керування для Обігрівач Consort PLSTi075E. Consort PLSTi075E 10 сторінок. R slimline low surface temperature wall mounted fan heater with intelligent fan control & electronic 7-day timer
Також для Consort PLSTi075E: Посібник зі встановлення та керування (7 сторінок)
Друкувати сторінку
8. Heat symbol
Every time there is a demand for heat, the dis-
play will show the heat icon.
9. Keys Locking
Press and hold + and - together for 5 seconds.
The display will show the
the step to unlock.
10. Setting the time and day
The PLSTi will come set with the correct time
and day. It has an internal battery back up
that can remember the settings. It will auto-
matically change the clock to adjust to British
summer time.
Should you need to alter the time, see section
20 "set-up menu".
11. Open window detection
Ensuring you do not waste energy on heating
the outside world, the heater is equipped with
optional open / closed window detection. The
heater recognises sudden drops in tempera-
ture when a window or a door is opened and
turns the heating off to save energy. When the
window is closed, the heater will automatically
detect a temperature rise, and switch itself
back on. Once enabled in the setup menu,
the open window detection is fully automatic
and does not require any human intervention
to be activated. When the open window de-
tection has been triggered, the heat symbol
will flash on/off as shown below.
symbol. Repeat
The system has been factory set to default
time and temperature values. If necessary, all
values can be adjusted. When the heating is
on, open window detection sensor will auto-
matically switch the heater off when it detects
a fall in temperature of 2°C in less than 10
minutes (this temperature can be changed in
menu 8 and time in menu 7). If a temperature
rise of 2°C in less than 30 seconds is detected,
the heater will switch itself back on (this tem-
perature can be changed in menu A and time
in menu 9).
12.Status light on the heater
Light colour
13. Heat symbol on the display
Every time there is a demand for heat, the display will show the
heat icon.
-
Reduced heat output when the room temperature
is close to the set temperature - allowing for almost
silent operation.
-
Full heat output
14. Fan only mode
This appliance comes with a fan only option. This is very
good for the warmer months to help improve air circula-
tion. To enter fan only mode, activate the display, reduce
heater temperature using MENU button until no heat sym-
bol is showing. Then use menu button to scroll until the dis-
play shows a fan symbol. To exit fan simply activate the
display and press the MENU button.
6
Heater status
STAND-BY No heat output
Reduced heat output
Full power heat output