Dantherm 094838 Посібник - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник для Контролер Dantherm 094838. Dantherm 094838 20 сторінок.

Step 6

Room temperature sensor

Use the new enclosed

temperature sensor and

connect to CC3000.

Place it on the same location as

the present sensor.

Note: For DFC 350/450 the

temperature sensor must be

placed 160 cm above ground

level.

Connect the room temperature

sensor to green connector J11

Pin No: 1 and 2

System setup

CC3000 controller

At startup insert SD card in the slot located on the side of the CC3000 controller.

This will allow you to select the config file for your free cooling system..

Note: until the SD card is inserted the controller will remain inactive and the buttons will not

function.

For advanced use of the CC3000 controller please refer to the user manual for this product.

Keep sensor clear

of surfaces

4 3 2 1