Addonics Technologies CFASTD4-2S Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Дисковий дублікатор Addonics Technologies CFASTD4-2S. Addonics Technologies CFASTD4-2S 8 сторінок. 1:11 duplicator

Друкувати сторінку

8-9. Auto Start Drive

This option is used to copy automatically once you inserted a HDD on target port.

Default is set at OFF, use the arrows to toggle.

8-10. Auto Start Timer

This option is used to set the period of time when the duplicator starts copying

automatically once you insert HDD on target port. Default is set at OFF, use the

arrows to choose time.

8-11. Tolerance Size

This option is used to set the tolerance in terms of percentage difference between

the source and target capacity. This is to ensure that when the target drive is

smaller than the source drive, the duplication process will not start.

8-12. BootTime Delay

This option is used to set boot delay time.

Troubleshooting

LCD

If the LCD display is blank after the device is turned on, check if the power

cable is properly connected and that the power supply is on.

Error Message

If an operation is manually terminated by pressing ESC while the system is running

a copy operation or hardware diagnostics, an error message will show up on the

LCD. This may lead to an illegal operation and cause the device to stop reminding.

If this happens, restart the device.

Source/Target

If the duplicator is unable to read the source or target please check that the data

and power cables are properly connected. When making a copy please make sure

that you set the source correctly.

Keys

If pressing the keys on the front panel produces no response from the system,

the keys may have malfunctioned.

Startup/Shutdown

Do not suddenly turn off the power while the system is performing an operation.

After shutting down normally, wait a moment (usually around 2 seconds) before

restarting the system so it can run self-diagnostics.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/