3xLogic infinias eIDC32 Посібник із швидкого старту - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Шлюз 3xLogic infinias eIDC32. 3xLogic infinias eIDC32 17 сторінок.
Друкувати сторінку
- 1. Important Safety Instructions
- 2. Before You Begin
- 3. Installation
- 4. Connect to an Ethernet Switch
- 5. Poe SWITCH
- 6. NON-Poe with MIDSPAN Poe INJECTOR
- 7. NON-Poe SWITCH
- 8. NON-Poe with POWER INJECTOR
- 9. DETERMINE the Eidc IP ADDRESS
- 10. CONFIGURE the Eidc with the WEB SERVER
- 11. CONNECT to the Eidc
- 12. CHANGE the Eidc to DHCP or STATIC IP MODE
- 13. WIRE the Eidc DOOR COMPONENTS
- 14. Eidc Web Server: Single Door Application
Before You Begin
This quick start guide provides brief instructions on how to install the
infinias
®
enabled Integrated Door Controller for access control. An additional
component, the Power Injector, is a PoE (Power over Ethernet) power
supply that has a built-in integral DC power injector. The Power Injector
can be used with the eIDC when using a non-Ethernet switch.
Each eIDC is configured with an internal web server that is capable of
serving web pages for configuring and using the device. This allows an
eIDC to be used as a stand-alone unit for a single door; that is, the eIDC
web software can be used to manage, view, and report activity through
an eIDC controlled network. This guide contains brief instructions for
installing the eIDC and configuring the eIDC web server.
Install the eIDC hardware components and configure the device as
instructed in this document. It is recommended that you familiarize
yourself with these instructions before beginning installation.
The "infinias Hardware Installation and Reference" manual and the
"infinias Web Interface User's Guide" contain more detailed
information. These manuals are located on our website at
www.3xlogic.com.
QSG-002 / 01-03-2017
eIDC hardware component. The eIDC is an Ethernet-
5