Audiovalve ASSISTENT 100 Mark 2 Посібник користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Audiovalve ASSISTENT 100 Mark 2. Audiovalve ASSISTENT 100 Mark 2 18 сторінок. Integrated stereo triode tube amplifier
Друкувати сторінкуAssistent 100 – Mark 2
integrated tube amplifier_
___________
REAR PANEL
all possibilities to connect your amp ...
INPUT TERMINALS
The 5 pair RCA and 2 pairs XLR Inputs are standard terminals for the
use of unbalanced and balanced input signals coming from the signal sources . The
ASSISTENT 100 uses for all fage XLR inputs female jackets and for the TAPE output one
pair of RCA jackets.
OUTPUT TERMINALS
The ASSISTENT 100 Mark 2 has two pair of output terminals in vertical direction for 8
ohm loads, you can internal switch to 4 ohm speakers
PLACEMENT AND VENTILATION
This AudioValve ASSISTENT 100 amplifier is designed to
operate at a moderately high temperature. The ideal location
is on the rigid stand or floor mounted away from direct contact with any objects,
materials or deep pile carpets which may be effected by the heat or which may interrupt
the flow of air around the amplifier.
When operating the amplifiers quite a lot of heat is generated which should be allowed to
dissipate without restriction. Make sure that no objects are placed on the top of the
amplifier. Always ensure adequate ventilations.