Apogee S2-442 Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари Apogee S2-442. Apogee S2-442 19 сторінок. Par-far sensor

OPERATION AND MEASUREMENT

Connect the sensor to a measurement device (meter, datalogger, controller) capable of measuring and displaying

or recording a millivolt signal (an input measurement range of approximately 0-150 mV is required to cover the

entire range of illuminance from the sun). In order to maximize measurement resolution and signal-to-noise ratio,

the input range of the measurement device should closely match the output range of the quantum sensor. DO

NOT connect the sensor to a power source. The sensor is self-powered and applying voltage will damage the

sensor.

Wiring for S2-141

Yellow: Positive (signal from PAR sensor)

Blue: Negative (signal from PAR sensor)

White: Positive (signal from Far-red sensor)

Black: Negative (signal from Far-red sensor)

Clear: Shield