Dascom DP-520 Посібник оператора - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник оператора для Принтер Dascom DP-520. Dascom DP-520 19 сторінок. Wired printer
Також для Dascom DP-520: Посібник користувача (12 сторінок), Швидкі інструкції з налаштування (2 сторінок), Швидкі інструкції з налаштування (2 сторінок)

The printer has two user connectors shown below:

Charger Input

Charger Input Socket Detail

Dimension (mm)

Inner

Inside

Ø 2.5

Outer

Outside Ø 5.5

The maximum insertion length is 12 mm.

RJ12 Combined Data Socket Detail

Signal Direction

To Printer

To Host

---

The printer monitors charge current into the printer, but does not regulate it in anyway. In order to fully and safely

charge the batteries, use only Dascom Battery Charger Adapters.

Caution: This connection is for a current-regulated battery charger only. Do not connect a standard voltage

power supply. Serious damage may result from inappropriate connections.

An optional serial data cable suitable for connecting the printer to a standard PC is available. This cable features an

integrated charger connector in the housing of the DB-9 connector. For trickle charging, the charger may optionally

be connected directly into the printer's connector, or indirectly into the connector in the data cable, thus giving the

maximum system wiring flexibility.

The connections to a standard PC COM port are as follows:

CONNECTIONS AND EMC PRECAUTIONS

Function

Positive / Charger

Negative / 0V Common

Description

Optional Charger Input

Wake-up Input

RS-232 Rx data

RS-232 Tx data

RS-232 Busy

0V Common (RS-232 signal return and Charger return)

RJ12 Combined Data Socket

Input

Pin 1