Dascom DP-520 Посібник оператора - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник оператора для Принтер Dascom DP-520. Dascom DP-520 19 сторінок. Wired printer
Також для Dascom DP-520: Посібник користувача (12 сторінок), Швидкі інструкції з налаштування (2 сторінок), Швидкі інструкції з налаштування (2 сторінок)

WALL AND BELT MOUNTING INSTRUCTIONS

A combined bracket/clip suitable for attaching the printer to a wall or belt is available

The bracket snaps into the bottom of the printer, and when used to clip to a belt, it may be secured by using the

supplied extended screw (replaces the battery compartment screw). Prior to use, two small 'break-outs' must be

removed from the battery cover of the printer as shown below:

When attaching to a belt, the bracket should be put on the printer first, and then the entire assembly clipped over the

belt as shown:

The securing screw may be used if required.

When attaching to a wall, the bracket must be located on the wall using screws and wall plugs as shown. The printer

may then be clipped into place and removed as required.

Remove the two 'break-outs'

using a small screwdriver.

Use a finger or small screwdriver to

release the clip and then gently lift the

printer to remove from the wall bracket.