Duren 321240 Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Фарборозпилювач Duren 321240. Duren 321240 13 сторінок. Electric hvlp turbine spray gun system

Друкувати сторінку
PLEASE KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE

Maintenance

1
Remove plug from the mains power supply before carrying out any maintenance or cleaning.
2
Do not immerse the spraygun in water or use flammable cleaning agents with a flash point of
less than 55
C.
o
3
Remove the cup and pour any unused paint into a container and store safely for future use.
4
Clean the cup thoroughly with warm water or thinners.
5
Pour a small quantity of warm water or thinners in the cup and reattach it to the gun.
6
Reconnect to the mains power supply and switch the motor on. Spray the water or thinners at a test
card or scrap metal until the liquid spray turns clear. Turn unit off and empty cup again.
7
Unscrew the air cap locking knob and remove the air cap and clean all parts thoroughly.
8
Do not clean nozzle or air holes with sharp metal tools.
Filter Maintenance
1
Do not use this tool without a filter. Dust & debris can a be sucked into
the motor, potentially causing permanent damage.
2
Release cover (3). You may need a flat blade screwdriver.
3
Remove filter (4). It is sometimes possible to clean the filter with a
vacuum cleaner or air blower, make sure adequate protection is
applied against airborne dust particles caused by cleaning.
4
Place cleaned/new filter back into machine with the smooth side facing
into the machine.
5
Securely replace cover.
Fitting Shoulder Strap
1
Follow the diagram to the right to fit the shoulder strap.
To adjust the narrow fan from flat to narrow or vice versa, union nut clockwise
or anti-clockwise to get the right setting.
It is only possible to turn the union nut 90
it further will cause damage to the unit and invalidate the warranty.
If spraying up or down, take off the cup and align the suction tube to suit the
angle of spraying. See diagram, left.
Duren Tools
T: 01582 484875 E: [email protected]
www.duren.co.uk
in any direction. Attempting to force
o
3
4