DURHAND C20-048V00 Інструкція з експлуатації - Сторінка 15
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Валети. DURHAND C20-048V00. DURHAND C20-048V00 18 сторінок. Electric car jack kit
Друкувати сторінкуEN
Operation
1. Turn on the power of the car.
2. Plug into cigarette lighter or connect with the car battery.
3. Choose the proper socket to the wrench's shaft (Fig.1).
4. According to the thread direction, press the switch for tightening or loosening (do
the reverse for L.H screw) (Fig. 2 ).
5. Press the left side of the switch (with mark II) to start. Each nut will be lose after
hearing the 'clatter' 2-3 times.
Note: If the wrench pins without impacting, start the engine at the maximum volt-
age.
6. Press the right side of the switch (with a mark) to tighten nuts - it will be tight
enough after hearing the 'clatter' sound 2-3 times.
Apply the wrench to the wheel nut, then press the
upper side of the switch (marked 'L'). The nut will
loosen . Press the upper side of the switch (marked
'T') and the nut will tighten.