Data Signs PTL S1 Посібник з експлуатації та технічного обслуговування - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з експлуатації та технічного обслуговування для Засоби безпеки Data Signs PTL S1. Data Signs PTL S1 10 сторінок.

Друкувати сторінку

STARTUP / SHUT DOWN

To Shut the light down or Start them up again, tap the START

UP / SHUT DOWN button and confirm by allowing count to

continue for 5 seconds.

The Light will go blank, or start up whichever the case might

be.

Once the lights are BLANK, switch them off and recharge the

battery for the next time. Also recharge the Remote.

Note: It is NOT recommended to power the remote OFF as this

will result in longer pairing time to the light when switched

on again. Keeping the Remote in standby will ensure a quick

pairing to the light next time.

SELF TEST

This does quick Green Amber Red

Sequence to test the light.

This test can only be done while the

lights are in SHUT DOWN state.

FLASHING YELLOW LIGHT

You can set the Light to Flash Yellow

only.

This might serve as a caution or

warning lights.

D A T A S I G N S A U S T R A L I A P T Y L T D