Data Signs PTL S1 Посібник з експлуатації та технічного обслуговування - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з експлуатації та технічного обслуговування для Засоби безпеки Data Signs PTL S1. Data Signs PTL S1 10 сторінок.

Друкувати сторінку

Gating Control Mode

Single PTL unit use only.

Gating Control is used to control the flow of traffic as per below illustration.

Gating control can also be used with 2 or more PTL units operating independently by traffic

operators, using a Walky-Talky to communicate with each other as per below.

Shuttle Traffic Control Sample

Shuttle Control is a form of traffic control used where a portion of the roadway is closed so that

only a single lane can be used alternatively by traffic from opposite directions.

Only one Traffic Light unit is allowed to show the Green signal at any time.

This control is coordinated between the 2 traffic controllers, normally with 2-way radios.

The diagram below illustrates the traffic control scenario where Shuttle control would typically

be used.

Roadworks

Site

Rear flashing

beacon when

light is red.

P T L - S 1 O P E R A T I O N S M A N U A L

Scan the QR code

Note: This diagram should not be used as

a guideline for setting up a roadwork site,

it is provided as an example only.

ROADWORKS

SITE

SHUTTLE CONTROL