Elsner 70513 Встановлення та налаштування - Сторінка 5
Переглянути онлайн або завантажити pdf Встановлення та налаштування для Контролер Elsner 70513. Elsner 70513 20 сторінок. Multifunctional actuators
Друкувати сторінку
1.
Description
Actuators KNX S1R-UP with integrated façade control have a multifunctional output
which can connect to either a drive with Up/Down control (blinds, awnings, shutters,
windows) or two switchable devices (On/Off for light and ventilation). Because the out-
put is designed to be free of potential, other systems can also be controlled, e.g. via the
manual switch input on a motor control unit.
Automation can be specified externally or internally. Internally, there are numerous op-
tions available for blocking, locking (e.g. master-slave) and priority definitions (e.g.
manual-automatic). Scenes can be saved and called up via the bus (scene control with
16 scenes per drive).
The KNX S1R-B4-UP and KNX S1R-BA2-UP models are equipped with inputs which
are used as bus inputs (buttons, alarms, etc.) or for T-NTC temperature sensors. The
KNX S1R-UP model does not have any analogue/digital inputs.
Functions:
•
Free of potential multifunctional output for a 230 V drive (shading,
windows) or connection of two switchable devices (light, fan)
•
Relays switch with low wear near the zero-voltage transition
•
Inputs for binary contact or temperature sensor (not on KNX S1R-UP)
•
Automatic runtime measurement of the drives for positioning (incl. fault
reporting object)
•
Position feedback (movement position, also slat position for shutters)
•
Position storage (movement position) via 1-bit object (storage and call-up
e.g. via buttons)
•
Parameters for taking drive and mechanics downtimes into account
•
Control via internal or external automation functions
•
Integrated shade control with slat adjustment for shutters based on the
position of the sun
•
Scene control for movement position with 16 scenes per drive (also slat
position for shutters)
•
Mutual locking of two drives using zero position sensors prevents collisions
e.g. of shade and window (master–slave)
•
Blocking objects and alarm reports have different priorities, so safety
functions always take precedence (e.g. wind block)
•
Manual or automatic priority setting via time or communication object
•
4 temperature switching outputs in the application program with
adjustable threshold values (presetting the parameters or communication
object)
•
Brief time limit (movement command blocked) and 2 movement limits
Configuration is made using the KNX software ETS 5. The product file can be down-
loaded from the ETS online catalogue and the Elsner Elektronik website on www.els-
ner-elektronik.de in the "Service" menu.
Actuators KNX S1R-UP • Version: 27.05.2020 • from software version 4.00, ETS programme version 4.00 •
3
Technical changes and errors excepted.
Description