Elsner Leak Технічні характеристики та інструкція з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Технічні характеристики та інструкція з монтажу для Аксесуари Elsner Leak. Elsner Leak 7 сторінок. Leakage sensor for water and pipe breakage reporting

Друкувати сторінку

2.2. Evaluation unit installation

The evaluation unit may only be installed and operated in dry,

indoor spaces.

Never expose the evaluation unit to water (e.g. rain) or dust. This can damage the elec-

tronics.

The evaluation unit can be screwed to the wall with mounting brackets.

2.3. Probe placement

The electrode probe is placed on the floor with the contacts facing downwards. Ideally,

the probe should be located in a place that, in case of water damage, would be the first

to be flooded — e.g. close to washing machines, sinks, baths, water pipes or pump

sumps.

Leakage sensor Leak • Version: 03.08.2017 • Errors and technical modifications subject to change without notice.

Installation and commissioning

Fig. 1

Evaluation unit exterior view

Mains supply line (mains sup-

ply 230 V AC, 50 Hz)

Bushing for alarm output line

(sealed in the delivered state)

BNC terminal for the probe

Loudspeaker (behind the

opening in the side wall

of the casing)

Mounting brackets