Elsner Leak Технічні характеристики та інструкція з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Технічні характеристики та інструкція з монтажу для Аксесуари Elsner Leak. Elsner Leak 7 сторінок. Leakage sensor for water and pipe breakage reporting
Друкувати сторінку1
2.4. Leakage sensor commissioning
Fig. 3 Overview
Mains 230 V
AC, 50 Hz
1. Connect the probe to the evaluation unit (insert the BNC plug).
2. Connect the mains supply line to the evaluation unit. Line voltage 230 V AC, 50 Hz.
3. The device is ready for operation.
2.5. Alarm output use
If the alarm output is used, the installation, testing, commissioning and
troubleshooting of the unit may only be performed by an electrician
(pursuant to VDE 0100).
DANGER!
Risk to life from live voltage (mains voltage)!
There are unprotected live electric components inside the device.
•
Observe the VDE provisions.
Leakage sensor Leak • Version: 03.08.2017 • Errors and technical modifications subject to change without notice.
5
Fig. 2
2
Probe
1) 3 electrodes on the lower side
2) Connection lead (for evalua-
Evaluation
unit
Evaluation unit beyond
the reach of water
Installation and commissioning
tion unit)
The probe stands with all
the three electrodes on the
floor
Probe