Datalogic CBX500 Посібник з монтажу - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з монтажу для Зчитувач штрих-коду Datalogic CBX500. Datalogic CBX500 17 сторінок. Scanning connection box
Також для Datalogic CBX500: Посібник з монтажу (16 сторінок), Посібник з монтажу (17 сторінок)
Друкувати сторінку
CBX500 INSTALLATION MANUAL
OPENING THE CBX500
To install the CBX500 or during normal maintenance, it is necessary to open it by unscrewing
the four cover screws:
CAUTION: The CBX500 must be disconnected from the power supply
during this operation.
MECHANICAL INSTALLATION
CBX500 can be mounted to various wooden or plastic surfaces using the two self-threading
screws (3.9 x 45 mm) and washers provided in the package.
Mounting to other surfaces such as concrete walls or metallic panels requires user-supplied
parts (screws, screw anchors, nuts, etc). A mounting template is included in the package to
facilitate hole drilling alignment.
CBX500 can also be mounted to a DIN rail using the BA100 (93ACC1821) mounting
accessory or to a Bosch Frame or 80/20 Frame using the BA200 (93ACC1822) mounting
accessory.
The diagram below gives the overall dimensions of the CBX500 and shows the two mounting
through-holes.
180
[7.1]
6
Mounting
Holes
mm
in
Figure 1 - Overall Dimensions
80.9
4
[3.18]
[0.16]
82.9
[3.26]