DV8 OFFROAD RBJL-12 Посібник з монтажу - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з монтажу для Автомобільні аксесуари DV8 OFFROAD RBJL-12. DV8 OFFROAD RBJL-12 13 сторінок. Jl mid width rear bumper
Друкувати сторінкуINSTALLATION
MANUAL
STEP 8 |
Push the sensor bezels
into place. The outside bezels should be
facing downwards, and the two inside
bezels should be facing down and
inwards away from the d-ring.
A rubber mallet can be used to lightly tap
them into place. The bezels should be flat
against the bumper.
STEP 9 |
With the bezels in place, run
the sensor wiring harness though cavity
in the bumper aligning the sensors with
the bezels. Push Sensors into bezels
ensure they have "clicked" into place.
Secure sensor harness using provided zip
tie tabs.
Note: If your jeep has factory metal
bumpers, one of the wires in the harness
will need to be lengthened. If equipped
with factory plastic bumpers, Skip to
step 13.
NEED HELP?
855-680-9595