ADE Automatic-Z Посібник з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Кухонна техніка ADE Automatic-Z. ADE Automatic-Z 20 сторінок. Gravity feed slicers with automatic transmission
Друкувати сторінку
4.
PREPARATION AND OPERATION
On receiving the box containing the slicer, make sure that it is intact and has not been damaged during
transit.
Should the slicer prove damaged, duly submit a report to the forwarding agent, no later than three days after
the date indicated on the documents, listing any damage done to the machine.
3.1 Opening the packaging
1 - Cut and remove the plastic straps;
2 - Remove the metal staples;
3 - Lift the box off vertically, locate the user guide, maintenance manual and the four feet;
4 - Using a 13mm spanner, unscrew the bolts securing the machine to the pallet;
5 - Remove the polyethylene bag and screw on the four feet;
6 - Lift the machine: two people are required to handle the machine, using the feet as handholds;
7 - Check the contents of the packaging, making sure they correspond to the specifications on the
documents.
Warning: The packaging can be disposed of as municipal solid waste: Comply with the law
dispositions in force in the place of installation.
Do not litter: Dispose of the parts making up the packaging appropriately.
3.2 Installation
Place the slicer on a smooth, flat and stable surface.
Any unevenness of the surface on which the machine is rested can be compensated using the adjustable
feet.
In the event the motor ventilation area faces a wall, make sure that a space of at least 200mm is left between
it and the wall. Leave enough room around the slicer so that it can be properly operated, cleaned and
serviced.
It is advisable to leave a space of at least 300mm free around the machine. The slicer works properly in
places with a relative humidity level of less than 80% and near sources of heat of no more than 30°C.
Automatic_Automatic-Z-200626-Rev014-UM-en
4