AUSTRALIAN MONITOR TX8202 Посібник з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Музичний мікшер AUSTRALIAN MONITOR TX8202. AUSTRALIAN MONITOR TX8202 11 сторінок. 8 channel 1 ru mixer
Також для AUSTRALIAN MONITOR TX8202: Технічні характеристики (2 сторінок), Технічні характеристики (2 сторінок)
Друкувати сторінку
Input Level Controls
Mic/Line Gain: The first 4 inputs are labeled Mic/Line 1 to Mic/Line 4 and should be adjusted to provide
the required mix level for each individual channel. Start with the controls set to Level 0 and turn
the controls clockwise until the desired mix level for each channel is reached. Each of the 4 inputs
is equipped with an mic/line dip switch which is located inside the unit (see Internal Adjustments).
Please ensure that this switch is in the correct position for the type of input (mic or line) that you are
connecting to each channel. The input sensitivity when in the mic level position is 1mV (for 1 Volt output).
The input sensitivity when in the line level position is 330mV (for a 1 Volt output)
Stereo Line Gain: The 4 auxiliary input channels are labeled Stereo Line 5 to Stereo Line 8. These
controls should be adjusted to provide the required mix level for each individual auxiliary channel. Start
with the controls set to Level 0 and turn the controls clockwise until the desired mix level for each channel
is reached. The sensitivity of auxiliary inputs 5 to 8 is 180 mV (for a 1 volt output).
Master Left and Right Output
The master Left and Right controls should be adjusted to set the overall mixer level for each output channel
based on the individual levels already set via the input channel gain controls. Start with the output controls
set at approximately the Level 5 position and adjust clockwise for more output level or counter-clockwise
for less output level.
Pan Control
Each input channel has a recessed (screwdriver adjustable) pan control. The pan control determines what
proportion of each input channel will be sent to either of the Left or Right output channels. Setting the pan
control in the centre position will send equal signal levels to both the Left and Right master outputs.
Turning the pan control in a clockwise direction will send progressively more signal to the Right output
channel and less to the Left output channel. Turning the pan control in a counter-clockwise direction will
send progressively more signal to the Left output channel and less to the Right output channel. The pan
control also allows the TX8202 to be used in dual zone applications.