2easy DT-RLC Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Контролер 2easy DT-RLC. 2easy DT-RLC 11 сторінок. Relay actuator

5. Lock Control Mode

In lock control mode, the DT-RLC

consumption lock; With configurable unlock timed output; Support exit control button.

5.1 How to set the unlock time

In lock control mode:

1). Power-on within 5 seconds, short-circuit S2 up to 3 seconds, the IN-USE indicator

flash.

2). Short-circuit S1 up to 3 seconds, and the IN-USE indicator always light.

3). Short-circuit again S2, meanwhile, the time of short-circuit equal to unlock time.

(the IN-USE indicator flashes once per second, Less than two seconds by one second

calculation; The maximum setting time is 30 seconds.)

4). After S2 released, saved unlock time, and exit the setting.

5.2 DIP setting for lock

The DIP switch in the back of the panel is used to set the address of the RLC. Please

refer to the followings for more detail informations about the DIP settings:

DIP

OFF,OFF,OFF Applies to door station1 & lock 1

OFF,OFF,ON Applies to door station1 & lock 2

ON,OFF,OFF Applies to door station2 & lock 1

OFF,ON,OFF Applies to door station3 & lock 1

allows to open gate door locks; Support high power-

Bit State

ON,OFF,ON

Applies to door station2 & lock 2

Descriptions

-3-