Austroflamm SmartSpot Інструкція користувача - Сторінка 10
Переглянути онлайн або завантажити pdf Інструкція користувача для Регулятор температури Austroflamm SmartSpot. Austroflamm SmartSpot 14 сторінок. Room temperature sensor
Також для Austroflamm SmartSpot: Інструкція користувача (20 сторінок)
Друкувати сторінку
6 | Connecting the SmartSpot sensor to the receiver
6
Connecting the SmartSpot sensor to the receiver
The SmartSpot receiver must be connected to the oven controls and supplied with power. (CHECK:
LED on the receiver is slowly flashing green.)
The SmartSpot sensor's batteries must be correctly inserted.
Establishing the connection takes approximately 30 seconds. When the connection is successful, the
LED on the receiver will be continuously lit green and the sensor will flash briefly every 3 minutes.
The temperature display and control will now work as they would with the wired temperature sensor.
10
EN
Now briefly press the SmartSpot sensor's button marked
"1". The LED will now flash green.
Then press the "Setup" button on the receiver. The LED be-
gins to quickly flash green.
SmartSpot