6K Products 30G24 Посібник з експлуатації та запасних частин - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з експлуатації та запасних частин для Промислове обладнання 6K Products 30G24. 6K Products 30G24 17 сторінок. Connect and cut hydraulic chain

Друкувати сторінку

After assembling the components as shown in figure 1, position the saw bar square to the log, at the correct height

with clearance between the bar guard and the side of the largest log and weld down solidly (Fig. 4).

Fig. 4

Hydraulic Connections

The hydraulic requirements to operate the saw are 29 to 35 gallons per minute at 2000 psi from a directional control

valve that has port A and B blocked in the neutral position. These pictures are examples of valve spool that will

work.

The hydraulic valve can be manual or electric control. Figure 5 shows hose

connections for correct operation.

Fig. 5