Active SmartHome Repeater Посібник з монтажу та експлуатації - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Ретранслятор Active SmartHome Repeater. Active SmartHome Repeater 15 сторінок. Active smarthome system

Друкувати сторінку

2. 2. 2. 2.

Press the Test button (button 5 under the module cover) on the back, so that

the Repeater transmits a learning signal to the Active SmartHome Gateway.

The red LED lights up and the device emits 1 beep.

3. 3. 3. 3.

If the Repeater receives an acknowledgement signal from the Active

SmartHome Gateway within 60 seconds, the learning procedure has been

successful. The Blue LED will light up for one second and the device emits a

long beep. If the Repeater fails, this will be indicated by the yellow LED

flashing 3 times and you will then have to repeat the procedure.

4. 4. 4. 4.

Move DIP Switch 4 to the OFF position. The Repeater will then emit 1 long

beep and the yellow LED will fade as the Repeater returns to Normal Mode.

3 3 3 3 .2. .2. .2. .2. Repeater

Repeater

Repeater Learn Procedure

Learn Procedure

Before pairing your devices with the Repeater, make sure you have already paired

them with the Active SmartHome Gateway (please follow the User Guide for the

sensor in question). Once you have done this, use the following procedure:

1. 1. 1. 1.

Under Normal Mode, slide DIP Switch 1 to ON and wait until it emits a long

beep and the yellow LED flashes slowly (1 flash every 2 seconds).

R e p e a t e r

F i g u r e 0 2

R e p e a t e r i n t h e S e t t i n g s p a g e

I ns t a l l a t i on a nd O pe ra t i o n G ui d e

P a g e | 9