Great Little Trading Alba L4467 Посібник - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник для Внутрішнє оздоблення приміщень Great Little Trading Alba L4467. Great Little Trading Alba L4467 10 сторінок. Regular - two door cupboard unit
Друкувати сторінку
STEP 3:
You are building this unit BACK up.
Take top panel C and insert 2x wooden dowels (#2) into the central holes and
connect to the top edge of panel E. Panel E should have the drill holes closer
to the edge of the panel upper most.
The grooved edge of panel C should be facing up and the large drill holes
should be facing inside the unit.
Then take panel D and insert 2x wooden dowels (#2) into the central holes
and connect the lower edge of panel E.
Again, the grooved edge of this panel should be facing up, but this time the
large drill holes should be facing outwards.
TOP
#2
C
#2
#2
Holes closest to the edge of
panel E to be upper most.
#2
E
D
#2
BASE
Hardware for Step 3:
4x #2 Wooden Dowels
STEP 4:
Hardware for Step 4:
Take side panel B and insert 4x wooden dowels into the
remaining holes.
4x #2 Wooden Dowels
Position the panel with the grooved edge facing up and
the top edge with the shaped notch by the magnetic catch.
Push onto the edges of panels C & D.
Insert 4x cam locks into the large drill holes on panels C &
D and turn clockwise to lock.
4x #3 Cam Locks
#2
TOP
C
Using Cam Locks:
When inserting into the panel, ensure
that each cam lock's arrow is pointing
towards the drill hole on the side
edge of the panel & the dowel that it
will be receiving.
When the panels are in the connected
position, using a screwdriver, turn the
cam lock in a clockwise direction to
lock and secure.
5
#2
#3
#2
B
#3
#3
#2
E
D
#3
#2
#3
BASE