HI-PRESS TANGYE HYDRAMITE Інструкція з експлуатації та техніки безпеки - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації та техніки безпеки для Валети. HI-PRESS TANGYE HYDRAMITE. HI-PRESS TANGYE HYDRAMITE 10 сторінок.

Друкувати сторінку

HYDRALITE

Fig.2

Function

(read in conjunction with Fig. 2)

The permissible working load and the travel of the hydraulic jack is marked on the equipment,

also see table 1.

The jack has an in -built hydraulic pump, which is worked by means of an operating lever ( 1),

under the control of the operator. The jack ram ( 2) is raised on each downward stroke of the

lever. For lifting, the operating lever (1) is placed fully into the operating quadrant ( 3).

Three positions are provided to enable the operator to choose the best ergonomic position. For

lowering, the lever is removed from the quadrant and placed into the release screw ( 4). Turning

this anti -clockwise will allow the ram to descend. The amount this is rotated will control the

speed of descent; only open a very small amount (approx. 5°) at first.

Close the relea se valve, to ready the jack for the next operation.

After use store the jack in an upright position with the ram fully retracted and the operating

quadrant in the 'up' position.

Table 1

Model

PS620

PS1220

PS630

PS1230

PS660

PS1260

P6100

Capacity (ton ne)

100

Add:

for Screwed Ram (for example PS620S)

for Claw (for example PS620C)

Stroke (ins)

Claw Capacity (ton ne)

N/A