CEL POWERminidriver Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Електроінструмент CEL POWERminidriver. CEL POWERminidriver 16 сторінок. Lithium ion screwdriver

Друкувати сторінку

1. Charging

Important Safety Notes

Work Area

(1) Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

(2) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools

create sparks which may ignite the dust of fumes.

(3) Keep bystanders, children and visitors away while operating a power tool.

Electrical Safety

(1) A battery operated tool with integral batteries or a separate battery pack must be recharged only with the supplied charger for the

battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.

(2) Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp

edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

(3) Lithium-ion batteries can rupture, ignite, or explode when exposed to high temperature environments e.g. in an area that is prone to

prolonged direct sunlight. Short-circuiting a Li-ion battery can cause it to ignite or explode and any attempt to open or modify the casing

or circuitry is dangerous.

Personal Safety

(1) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the

influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

(2) Dress properly. Do not wear loose clothing or jewellery. Contain long hair. Keep your hair, clothing and gloves away from moving

parts. Loose clothes, jewellery, or long hair can be caught in moving parts.

(3) Avoid accidental starting. Carrying tools with your finger on the switch invites accidents.

(4) Attach or remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of

the tool may result in personal injury.

(5) Do not over-reach. Keep proper footing and balance at all times.

(6) Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used

for appropriate conditions.

Tool Use and Care

(1) Use clamps or other practical way to secure and support the workpiece to a stable platform.

(2) Do not force tool. Use the correct tool for your application.

(3) Do not use tool if switch does not turn it on or off.

(4) Place the switch in the locked or off position before making any adjustments, changing accessories, or storing the tools.

(5) Switch the tool off before making any adjustments, changing accessories, or storing the tool.

(6) Store idle tools out of reach of children and other untrained persons.

(7) When the tool is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal

objects that can make a connection from one terminal to another.

(8) Maintain tools with care. Keep cutting tools sharp and clean.

(9) Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. If

damaged, have the tool serviced before using.

(10) Use only accessories that are recommended by the manufacturer for your model.

Service

(1) This product is only serviceable by the original manufacturer. Any attempt to service the product yourself will void any warranty and

may cause the product to malfunction.

SPECIFIC SAFETY RULES

• Hold tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring.

• ALWAYS wear ear protection when using the tool for extended periods

• NEVER place hands or other body parts near the drill bit or chuck during operation.

• NEVER touch or place your hands, fingers or other body parts near the tool's moving parts.

• Use correct tool. Don't force small tool or attachment to do the job of a heavy-duty tool.

• NEVER use a power tool for applications other than those specified in the Instruction Manual.

• NEVER allow the tool to be operated by children, individuals unfamiliar with its operation or unauthorized personnel.

1.0