ADEMCO TI110B1 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Система безпеки ADEMCO TI110B1. ADEMCO TI110B1 18 сторінок. Gsm/pstn dual network burglar alarm system

Друкувати сторінку

(1) Uncover the plastic shell of the detector, and if you want to make it match code into the

first zone, you can press the "

and then you press the built-in " code-matching" button of detector without releasing.

When seeing the transmitting indicator of detector shining, you press the

" .Simultaneity, you can hear a long prompt voice, which means your successful

Enter

operation

(2) Press the key "

And you can use the above way to match code with Zone 2-16

(3) When matching code, if the alarm panel sounds "di di" indicator voice, it means that the

code of this detector is the same as that of one of matched detectors or this zone have been

matched code with 3 detectors. And you can choose another zone to match code this

detector into or clear one of matched ones for this new one (Note: a zone is allowed to

match code with 3 different detectors at most)

(4) Clear the matched code: press the key "

that you want to clear, and then press the "

imply that the matched code has been cleared.

9. Match code between the alarm panel and remote control

(1) Please press continually the "

the "

" key on the remote control without releasing, and then press the key

Enter

"of the alarm panel. You will hear a long indicator voice to inform that the

remote control has been matched code successfully. ( Note: a host is allowed to match

code with 15 different remote controls at most)

(2) When coding with a new remote control, the alarm panel sounds " di di" indicator voice,

which means that the code of this new one is the same as that of one of the matched

ones or the host has been coded with 15 remote controls. You are not allowed to code

the remote control again. And if you want to recode, please clear the matched code first.

(3) Clear the matched code: press continually the key "

16 zones glitter, and then press the "

code with the remote control successfully.

10. Reset/Modify the password

Demonstration: supposing that the password is 5678

Operation steps: press the key "

and a long indicator voice will imply that you have set it successfully.

Modify the password: you can do as the above way to modify the password, and the new

password will automatically replace the former one. The password is subject to the latest

one.

" once. And the screen displays

" continuously, and the screen displays will display zone number.

" till the screen displays the number of zone

Delete

" key till the light of all the defense area, and press

" key. And you can clear all the matched

Delete

Code

", and then press

PROG

Zone

" key. And a long indicator voice will

" key till all the indicators of

Ent er