ADEMCO Vista 4120 Інструкція з монтажу Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Система безпеки ADEMCO Vista 4120. ADEMCO Vista 4120 18 сторінок.

Друкувати сторінку

There

are

two types of commands that can be issued to the

system:

1. Control Commands -

- To Arm the System in the Away Mode*flr

- To Disarm the System.m

-ToEypassaZono

- To Force the System to Accapt a New Program

Download

- To Shut Down Communication (dialer) Functions

(non-psyment of monftorfng fees in an owned system)

- To Shut Down all Secur&y System Functions (non-

payment for a leased system)

- To fnhibit Local Keypad Programming (pravents take-

over of your accounts)

2. Status Commands -

- To Cause the System to Upbad a Copy of its

Resident Program to the central station.

- To Read System Status:

Arming Status

Ready Status and Current Faults

PreseMe of Alarms

Presence of Troubles

AC Power Status

Bypsss Status and Current Bypasses

wotos

1. If the system is programmed for open/dose reporting by

user. User #t will be reponed.

2. After the 4120 and the PC have established

valid

communication, each console will become inactive. The

4120 will resume the normal security functions after it is

commanded to hang up. See the 4130PC instructbns for

details.

The detailed operation of the functions described bebw is

covered in the Installation Instructions for the 4130PC

Downbad Software Diskette.

- To Read List of Faulted Zones

-ToReadListofBypassedZones

'-ToReadlJstofZonesCurrentlyinAlann

-ToRaadListofZonaaCurrentlyinTroubte

BemoteDammunicaUon

Spacifkations

Program Downbad Tie - 1 minute for a complete

Tmsotaf

Time Induding Call UpGall-Badr 3-4

minutes

Romota Command/Prog~mlng

Adviawy Noteaz

Alarm and Trouble Reporting are disabled during the

timathat the system

Snd

the central station are linked to

each other for the described functions, following a valid

exchange of codes.

Keypad entries are fgnored during the same time inter-val

cited above.

Should an alarm transpire during the remote progranVcontrol

interval, the system would not response to the alarm

amdlln.

A copy of the program downloaded may be produced from

the IBM PC compatible computer, using the product-s

internal report generator, when an optional printer is

connected.

ZONE TYPES AVAILABLE FOR SELECTlON

For each zone used, one of the following zone types must be

selected:

Entry/Exit

Burglary.

Assigned to sensors on doors

through whii entry and exit will normally take Place when

the system is armed.

Not used

Parlmakr

Burglary. Normally assigned to all sensors pn

exterior

doors

and windows requiring instant alarm.

Interkr, Followor. Delayed alarm only if the Entry)

Exit zone is faulted first; otherwise, produces an instant

alarm. Assigned to zone covering an araa such x9 a foyer or

bbby through which one must pass upon entry to raach the

keypad to dii

the system. Designed to provide instant

intrusion alarm in the event an intruder hides on. the

premises prior to the system being armed or gains -8s

the premises through an unprotected area

Trwbk

by Day/Alarm by Night. Can be assigned to a

zone which contains a foil-protected door or window (such

as in a store), or to a zone covering a %ensitive' area such

as a stock room, drug supply room, ek, or other controlled

access area where immediate notification of an entry is

desired. During the disarmed state (day), the system will

provide latched Console annunciation (and central station

report, if desired) of openings or troubles (such as sensor

malfunctions or foil breaks). During the armed state (night),

violations will initiate an alarm.

24Mur

Siknt Alarm. Thii type generally assigned to a

zone containing an Emergency button that is designed to

initiate an alarm report to the Central Station, but which

produces no local displays or alarm sound.

2btmur Audible Alarm. This type also assigned to a zone

containing an Emergency button, but which will initiate an

audible alarm in addition to an alarm report to the Central

Station.

240hour Auxlllay

Alarm (Console sounder only). This

type assigned to a zone containing a button for use in

personal emergencies, or to a zone containing monitoring

devices such as water sensors, temperature sensors, etc.

Designed to fniiate an alarm report to the Central Statbn

and only provides Console warning sounds and alarm

dww.

Supeniaod

Firi (alarm or short/trouble on open). Fire

zone may not be bypassed. On/y uaaale on Zone 1 when

/t Is wired with w) EOL

resistor.

40DIGIT SECURITY CODES

Installer Code

The installer programs the Installer Code initialty as part of the

programming procedure (see 'Programming the Security

Control). In thii system, the installer is con-sidered to be user

Xl. The installer code permits re-entry into the -ramming

mode (unless '98 has been previously usedto

exit the

programming mode) and also allows access to the normal

functions of the system. During initii programming, the installer

also programs the Master security code into the system.

[ I[ I[ 1 ] Installer Code (User al).

assigned during programming.