HiBoost Home 4K Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Подовжувач HiBoost Home 4K. HiBoost Home 4K 20 сторінок. Mobile signal booster

'2"

We highly recommend that you use the LCD display on the booster US this

method is generally more convenient. However, in situations where the desired

corrier's signal is much weaker than the other local signals, using 0 mobile

phone, opp or signal level meter can be 0 more accurate method of homing in

on the best signal for installation.

. LCD Display Method

Connect the outdoor antenna to the booster's outdoor port. Fix the outdoor

antenna on the roof of the building and point it to the nearest cell tower. Then

have 0 look at the gain and output power value displayed on the dmplifier's

LCD.

The outdoor ontenno receives the strongest signal when the booster's downlink

output power reaches its highest level in each bond. If the LCD shows moximum

gain and power, and there are not any oldrms (no ISO, ALC, OFF legend

flashing and no quick floshing green or red in LEDs), it means the present

location is the best for ensuring that the booster hos moximized performance.

The maximum downlink power for Home 4K is 10dBm, and the maximum

downlink gain is 60dB.

Note: These showed values may vary dynomicolly at times between 1-3 dB

which is normal due to outdoor signol conditions.

. Mobile Phone Method

You can use Cl telephone to test signal strength on the top of the building. The

number of bars on the network indicotor will define opproximdte strength of the

received signal. Normally the roof of the building is the best place to receive the

strongest signol. As shown on the drawing below, you need to test the signal in

the points from A to E, and select the location with the best signal strength for

outdoor installation. It is recommended to use 0 mobile opp that can display in 0

6/18