HiBoost Home 4K Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Подовжувач HiBoost Home 4K. HiBoost Home 4K 20 сторінок. Mobile signal booster
Друкувати сторінку
'2"
W
>\
slide into mount
plastic expansion
bolt
1.6 Install your signal booster
The signal booster should be mounted in an easily accessible area so it's easy to
perform general maintenance. The optimal area would be on a wall located
near a power outlet. Please use a surge protector rated at a minimum of 1000
Joules between the amplifier's power adaptor and the AC power outlet on the
wall.
Mount the booster with the included screws as shown in the figure below.
I slide into mount
l
plastic expansion bolt
\l
hanging folder
apping screw
1.7 Run coaxial cable
Loosely run the supplied coaxial cable from your outdoor antenna to your
booster connector marked "Outdoor". We recommend applying silicone
caulking to fully waterproof the connection.
Connect the indoor antenna cables from your indoor antenna to the booster
connector marked "Indoor". Tighten the connection by hand.
(After you have tested the system you can permanently secure the coaxial
cable).
8/18