Hickory Industries Rotisseries N/1.9E Посібник з монтажу та експлуатації для власників - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для власників для гриль Hickory Industries Rotisseries N/1.9E. Hickory Industries Rotisseries N/1.9E 14 сторінок.

Друкувати сторінку

Computer Controller Programming Instructions

1. After the 1.9e has been plugged in, the display on the computer controller will be powered up and

will show [HLd]. The computer (thermostat/timer) controller is used to set and control cooking

temperature, hold temperature and a timed cooking cycle.

2. In addition to the display, there are four button on the controller {t}, {s}, {SET}, and {START}.

3. With [HLd] appearing on the display, press {SET} button once to enter the programming mode:

Press

Display

HLd

SET

SPC

SET

###

400

s t

SET

SPH

SET

###

200

s t

SET

###

130

s t

NOTE:

When setting the cooking time, the display will jump from [59] to [100], which mean

one hour. Thus

a display of [130] means one hour and 30 minutes, not 130 minutes!

Result

Computer indicates that you are in the programming mode and the Set

Point Cooking (SPC) temperature can be set next.

By pressing {SET} again, a cooking temperature value will appear on

the display.

Press the arrow up (or arrow down) buttons until the desired value

appears on the display. As in this example, we recommend a value of

400 which means that the Set Point Cooking (SPC) temperature is

400ºF.

By pressing set again, the computer indicates that the Set Point Hold

temperature can be entered next.

By pressing {SET} again, a hold temperature value will appear on the

display.

Press the arrow up (or arrow down) buttons until the desired value

appears on the display. As in this example, we recommend a value of

200 which means that the Set Point Hold (SPH) temperature is 200ºF.

By pressing {SET} again, the computer indicates that the cooking time

(in hours and minutes) can be entered next.

By pressing {SET} again, a cooking time value will appear on the

display.

Press the arrow up (or arrow down) buttons until the desired value

appears on the display. In this example, we use a value of 130 which

means that the set cooking Time (t1) is one hour and 30 minutes.

4900 Westside Avenue, North Bergen, New Jersey 07047

Tel: [201] 223-0050 Fax: [201] 223-0950

Hickory Industries, Inc.

1.9 Manual 10/97

Page 10 of 14