HID EDGE EVO ESH400 Посібник з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з монтажу для Контролер HID EDGE EVO ESH400. HID EDGE EVO ESH400 12 сторінок. Hi-o networked controller

Друкувати сторінку

EDGE EVO Hi-O Networked Controller

EH400

Power Analysis

Before starting installation, determine which components will be used in the system and analyze the power requirements to avoid

over-loading the EDGE EVO Hi-O Networked Controller (EH400).

The following steps illustrate sizing power requirements for the system.

Step 1 - Identify System Components

Identify the components that will be used in the system. A typical installation may include the following components:

•

Step 2 - Create System Layout

Using the components identified in "Step 1 - Identify System Components" on page 2, create the system layout.

In this example, the EH400 is connected to the remote server through an Ethernet connection and manages door

peripherals over the Hi-O bus. The EDM-M receives inputs from the Door Position Switch and REX Switch to drive the

Magnetic Lock and Local Exit Alarm outputs.

Unprotected

Area

Hi-O iCLASS

Reader

Figure 1 - System Layout Example

INSTALLATION GUIDE

Door Position Switch – Detects when the door is open or closed.

Magnetic Lock – Holds the door locked.

Request to Exit (REX) Switch – Unlocks the door when exiting the secured area.

Local Exit Alarm – Sounds an alarm upon an unauthorized exit.

EDGE EVO Hi-O Edge Door Module (EDM-M) – Connects peripheral devices to the Hi-O bus.

EDGE EVO Hi-O Networked Controller (EH400) – Provides access control and manages all peripherals

around the door.

Hi-O iCLASS Wiegand Reader – Provides entry into the secured area.

ted

Protected Area

Hi-O Networked

Hi-O N

Con

Controller

Ethernet Data

CANbus Data

Door Position

Switch

Magnetic Lock

Magne

Local Sounder

Exit Alarm

Remote Area

Ethernet Switch

Door

Module

Physical Access

Control Server

(real-time functions

not required )

REX Switch

82000-920, D.1