909 909210TS Інструкція з експлуатації - Сторінка 12

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Пила. 909 909210TS. 909 909210TS 18 сторінок. 1200w 210mm 8" table saw

Using the fence on the left side

1. You can use the scale on the table top to set the fence

so that the work piece is sawn to the required size, this is

only a guide.

2. Loosen the fence locking knob (6) and set the left edge of

the fence bracket (5) to the required width on the scale.

3. Tighten the fence locking knob (6) to clamp the fence

in position.

Using the fence on the right side

4. Loosen the fence locking knob (6) and set the right edge

of the fence bracket (5) to the required width on the scale.

5. Tighten the fence locking knob (6) to clamp the fence

in position.

Using the mitre gauge

1. Slide the mitre gauge (7)

into the slot of the table

top (1)

2. Slacken the knurled knob

on the mitre gauge.

3. Turn the mitre gauge until

the arrow points to the

required angle.

4. Re-tighten the knurled

knob.

5. For cutting a large work

piece, you can use the

fence rail from the fence

assembly to extend the

mitre gauge.

IMPORTANT.

Do not push

the fence too far towards

the saw blade. The distance

between the fence and the

saw blade should be about

20mm.

Using the push stick

1. The push stick is screwed

to the the left side of the

table saw. To use the push

stick simply unscrew it from

the frame of the table saw.