Galaxy Audio HDR2 Інструкція з експлуатації - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Обладнання для запису Galaxy Audio HDR2. Galaxy Audio HDR2 14 сторінок. Galaxy audio handheld digital recorder instruction manual

Track up/Forward key: Press this button once to select next track, hold down the
button to change the track number quickly; Hold down the key during playing to fast
forward playback, release the button to go back to normal playback.
Vol. up/ Manual selector button: Press this button during playback to increase the
volume level of headphone or speaker; Press this button for item selection when in
MENU mode.
Vol. down/ Manual selector button: Press this button while playing to decrease the
volume level of headphone or speaker; Press this button for item selection in MENU
mode.
MODE button control
The MODE button is used to provide additional functions. To select a MODE function, press the
MODE button first (the LCD will show MODE) and then press the desired function button
immediately to select the MODE function. Here is a description of the mode functions:
Memory selection: use this function to select the internal flash memory or the
+
SD card memory as the record target and playback source.
Delete tracks function
+
Folder 1 or Folder 2 select function
+
Group number: decrease the selection function
+
Group number: increase the group number
+

4. Power on

1. Open the battery cover and install two new AA batteries into the HDR2.
2. The HDR2 works on both primary batteries (Alkaline batteries) and Ni-MH rechargeable
batteries. When using Alkaline batteries, select the "1.5V" position; to use Ni-MH
rechargeable batteries, select the "1.2V" position of the battery select switch.
3. Press and hold the
operating mode.
4. Press and hold the button for two seconds to switch off the device.
5. The device will switch off automatically if no other button is pressed after 5 minutes (except
when in record or play mode).
6. The LCD will show "Battery Low" when the batteries are nearly exhausted. Please install
new batteries at this point.

5. Operate MENU setup

When the
key is pressed, the LCD will display all main items of MENU setup. Press
the
or
keys to move to previous or next main items. Press
select secondary items. Press the
button for two seconds. The device will switch on and enter the
key again to exit MENU mode.
4
or
keys to