Copernicus COP-IS2 Посібник з монтажу - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з монтажу для Навчальне обладнання Copernicus COP-IS2. Copernicus COP-IS2 16 сторінок.

Actual Size:

You will need:

2 Person Task

Select Your Whiteboard Height

& Orientation

Select a Whiteboard position to suit the height that works best for your

classroom:

- Early childhood and primary teachers may prefer a lower position

- Junior & intermediate teachers may prefer a higher position

Note the holes that work best for you; there are three options on the

Inspiration Station

You may attach the Whiteboard so that the Sliding Whiteboard slides out to the left or to the right. Note

the label on the Whiteboard that will help to determine how to attach the whiteboard so that the board

slides out to the preferred side. Make sure the Sliding Board is oriented to the desired side when you

attach it.

Attach Whiteboard

Put brakes in the locked/down position to hold the unit steady

Using the holes that you selected as the correct height for your classroom

(Step 1), secure the Whiteboard to the Whiteboard Supports

- Fasten using M6 30mm bolts, 6mm lock washers & acorn nuts

- Tighten bolts

Peel off plastic film on the Whiteboard before use

x 4

(Not to Scale)

Whiteboard x 1

F I

IS2 - Version E - Released 22 June 2010 - Copernicus Educational Products Inc.

x 4

Lock Brakes

High position

Middle position

Low position