Galvin Specialised 170.81.11.00 Інструкція з монтажу виробу - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу виробу для Сантехнічний виріб Galvin Specialised 170.81.11.00. Galvin Specialised 170.81.11.00 4 сторінки. Remote electronic drinking bubbler tap - battery

Друкувати сторінку

3. Fit Piezo Button

−

Install piezo button and connect it to the

electronic control unit.

Water

Supply

Solenoid

Coil

5. Fit Solenoid and Outlet

−

Fix the solenoid in position ensuring that

the solenoid coil is not facing

downwards.

−

Fit flexi hose to solenoid and water supply.

−

Fit flexi hose to outlet

4. Connect, Solenoid and Battery

−

Connect Piezo button, the solenoid and the battery to

the eletronic control unit.

−

The unit was supplied with 2 x 3.2metre extension

leads for connecting to battery and solenoid.

6. Testing

−

Once the drinking tap has been installed and tested

for leaks, the water height may be adjusted to suit the

available pressure .

− To adjust water flow (if required)

1. Remove the blanking screw

2. Adjust the water flow by turning the regulating

screw

3. Replace blanking screw

Note: The full range from minimum flow to

maximum flow is only ¼ turn

Version 1,15

March 2021, Page 3 of 4

Regulating

Screw

Blanking

Screw