Galvin Specialised 170.81.11.00 Panduan Instalasi Produk - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Instalasi Produk untuk Produk Pipa Galvin Specialised 170.81.11.00. Galvin Specialised 170.81.11.00 4 halaman. Remote electronic drinking bubbler tap - battery
Halaman Cetak3. Fit Piezo Button
−
Install piezo button and connect it to the
electronic control unit.
Water
Supply
Solenoid
Coil
5. Fit Solenoid and Outlet
−
Fix the solenoid in position ensuring that
the solenoid coil is not facing
downwards.
−
Fit flexi hose to solenoid and water supply.
−
Fit flexi hose to outlet
4. Connect, Solenoid and Battery
−
Connect Piezo button, the solenoid and the battery to
the eletronic control unit.
−
The unit was supplied with 2 x 3.2metre extension
leads for connecting to battery and solenoid.
6. Testing
−
Once the drinking tap has been installed and tested
for leaks, the water height may be adjusted to suit the
available pressure .
− To adjust water flow (if required)
1. Remove the blanking screw
2. Adjust the water flow by turning the regulating
screw
3. Replace blanking screw
Note: The full range from minimum flow to
maximum flow is only ¼ turn
th
Version 1,15
March 2021, Page 3 of 4
Regulating
Screw
Blanking
Screw