Dynojet POWER VISION PV3-22-11 Посібник з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з монтажу для Аксесуари для мотоциклів Dynojet POWER VISION PV3-22-11. Dynojet POWER VISION PV3-22-11 7 сторінок. For 2016-2022 yamaha yxz1000r, 2017-2022 yamaha yxz1000r ss

Друкувати сторінку
INSTALLING THE POWER VISION
DIAGNOSTIC PORT

GETTING STARTED

Use the Tune File Wizard to prepare your Power Vision
device with the stock (stk) and tune (djt) fi les needed to
fl ash your vehicle.
1
Connect the Power Vision to the vehicle.
2
Turn the key on. The Power Vision will scan for fi les.
There are three possible fi le states:
File State 1: No compatible tune or stock fi les.
File State 2: No compatible tune fi les.
File State 3: All required fi les found.
3
Gauges are displayed.
Connect the Power Vision to the
vehicle diagnostic port to collect
ECU information. Turn the key on.
1
Secure the Power Vision to the vehicle using the supplied
Velcro. Make sure the Power Vision will not interfere with
the operation and steering of the vehicle.
Visit
www.dynojet.com
for your Power Vision.
Note: The Power Vision does not need to be mounted
to the vehicle, however, the Power Vision provides
a window into your vehicle. Mount the Power Vision
to your dashboard or handlebars and gain access to
customizable full-color gauge screens, along with
data logging and troubleshooting screens.
2
Attach the diagnostic cable to the diagnostic port on the
Power Vision and to the diagnostic port on the vehicle.
The diagnostic port is located in the vehicle electronics
compartment under the panel between the seats.
3
When done riding, be sure to unplug the Power
Vision to avoid draining the battery.
File State 1:
Go to
tunes.dynojet.com/
download stock and tune fi les.
File State 2:
Go to
tunes.dynojet.com/
download tune fi les.
File State 3:
All required fi les found. The Power
Vision is ready to fl ash a tune to the
connected vehicle.
for an array of mounting solutions
to
to
3