Dynojet POWER VISION PV3-22-11 Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу для Аксесуари для мотоциклів Dynojet POWER VISION PV3-22-11. Dynojet POWER VISION PV3-22-11 7 сторінок. For 2016-2022 yamaha yxz1000r, 2017-2022 yamaha yxz1000r ss
Друкувати сторінкуFLASHING YOUR VEHICLE
The Power Vision must be paired to the connected vehicle ECU
to function properly.
Note: Once paired to the vehicle ECU, the Power Vision will
not work on another vehicle without purchasing a tune
license.
1
From the Main Menu, select Flash Tune.
2
Select the tune fi le (.djt) and press Enter to view the Tune Info.
The Tune Info screen contains the technical notes showing what
was changed in the tune.
Note: The PV3 fi lters out fi les which are not compatible
with the connected vehicle based on year/trim delivered
direct from the factory and result in varied tune Compat and
CheckSum within the ECU. Additional fi les may be visible
on the device when connected via USB or on the website;
however, the PV3 will only display fi les which directly fi t your
vehicle.
Note: The Dynojet tune fi le (.djt) is a tune fi le which is
different (better than stock performance or the necessary fi le
when bolting on an exhaust, for example); the stock fi le (.stk)
is the direct duplicate of what the OEM shipped.
3
Press Enter to accept the tune, or restore the ECU to original
stock (.stk) fi le, and pair the Power Vision to the vehicle.
Note: Pair to vehicle will only happen on the fi rst fl ash.
4
Press Enter to pair and lock the Power Vision to the ECU and to
begin the fl ash. Do not turn off the key switch or disconnect the
Power Vision during the fl ash.
5
After the fl ash is complete, turn the key off and wait 45 seconds
before turning the key back on to start.
VIEWING THE VEHICLE INFORMATION
This menu allows you to view the device status (paired/not
paired), VIN #, Model ID, ECU serial number, tune compat, and
checksum compat.
Select Vehicle Tools>Vehicle Information.
VIEWING THE DIAGNOSTIC CODES
This menu allows you to read and clear diagnostic trouble
codes.
1
To read codes, select Vehicle Tools>Diagnostics>Active
Codes.
2
To clear codes, select Vehicle Tools>Diagnostics>Clear
Codes.
4 YAMAHA YXZ1000R INSTALLATION GUIDE
VEHICLE TOOLS
VEHICLE INFORMATION
DIAGNOSTICS
DELETE DATA LOGS
VEHICLE TOOLS
VEHICLE INFORMATION
DIAGNOSTICS
DELETE DATA LOGS
98200133