Dynojet Power Vision Посібник із швидкого старту - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Автомобільна електроніка Dynojet Power Vision. Dynojet Power Vision 17 сторінок. For 2019-2022 can-am ryker 600/900
Також для Dynojet Power Vision: Посібник з монтажу (6 сторінок), Посібник з монтажу (8 сторінок), Посібник з монтажу (7 сторінок), Посібник (7 сторінок), Посібник з монтажу (7 сторінок), Посібник з монтажу (7 сторінок), Посібник з монтажу (7 сторінок)

DIAGNOSTIC CONNECTOR LOCATIONS

2004-2015 Dyna Models

Diagnostic connector is located behind the

Left hand side cover. Connector is Light Grey

in color with black rubber plug installed.

Note: 2001-2011 models are J1850 using the PV-1.

Note: 2012-13 models are CAN, using the PV-2.

2007-2015 Sportster Models

(including XR Models)

Diagnostic connector is located behind the

Left hand side cover. Connector is Light Grey

in color with black rubber plug installed.

2002-2007 Touring Models

Diagnostic connector is located behind the

right hand side cover. Connector is Light

Grey in color with black rubber plug installed.

Note: Requires removing the Right side saddle bag.

2008-2015 Touring Models

Diagnostic connector is located behind the

left hand side cover. Connector is Light Grey

in color with a black rubber plug installed.

Note: Requires removing the Left side saddle bag.

2001-2015 Softail Models

Diagnostic connector is located under

the seat, attached to the frame by the rear

fender. Connector is Light Grey in color, with

black rubber plug installed.

Note: Requires removing the seat.

Note: 2001-2011 models are J1850 using the PV-1.

Note: 2011-2013 CVO models are CAN using the PV-2.

Note: 2012-2013 models are CAN using the PV-2.

2002-2015 V-Rod Models-

Shown on Page 8

Diagnostic connector is located behind the

Right Front frame cover. Connector is Light

Grey in color with black rubber plug installed.

Note: Tools required to access.

Power Vision Quick Start Guide - 9