MAINLINE ML510 Посібник з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з монтажу для Сантехніка для кухні та ванної кімнати MAINLINE ML510. MAINLINE ML510 3 сторінки. Undercounter lavatories
Друкувати сторінкуINSTALL THE LAVATORY (cont.)
Install the drain to the lavatory according to the drain
manufacturer's instruction.
NOTE:
Do not use adhesive or adhesive sealants.
Apply a continuous bead of quality sealant to the top
surface of the lavatory rim where it will contract the
countertop.
IMPORTANT
Caution: Risk of product damage.
Position the lavatory squarely under the cutout before tightening the clamps. Draw the lavatory rim up against the countertop until
it is snug. Do not overtighten.
Immediately wipe away any excess sealant and fill any voids as needed.
Allow the sealant to set for 30 minutes before proceeding.
Connect and tighten the trap to the drain, and complete the water supply connections to the faucet according to the instructions
packed with the faucet.
Run water into the lavatory and check for leaks.
Clean up with a non-abrasive cleaner.
THANK YOU FOR CHOOSING MAINLINE
If you encounter any installation or performance problems, please don't hesitate to contact
IMPORTANT
Caution: Risk of personal injury or product
damage.
cause injury if handled carelessly. Get help lifting the
lavatory.
For marble countertops, install the lavatory to the countertop with
the clamps and screws. For other countertop materials, refer to the
countertop manufacturer's instructions for recommendation fasteners.
Overtightening the nuts may cause irreparable damage to the lavatory.
Page 3
Handle with care. Product can break, chip or