AGT INDUSTRIAL AGT-B1000 Посібник з експлуатації - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Підйомні системи AGT INDUSTRIAL AGT-B1000. AGT INDUSTRIAL AGT-B1000 19 сторінок. Two-post auto lift
Друкувати сторінкуwhen it is raised to a certain height ( stop and check).
* Danger* : Unlocked arms can cause vehicle fall off from the lift.
4.3 Stopping
After raising to desired height, press the lower lever and the lift will automatically lower to a
safe position, the safety lock will be engaged and the lift will be locked.
4.4 Lowering
The safety lock must be released before lowering.
1. Press the power switch to raise the car by approximately 30mm/1.2" .
2. Pull the safety lock release cables on both sides to unlock.
3. Press the lower lever to start lowering process, the arm lock will be automatically
released and allow the arm rotating when the vehicle is completely lowered to the ground.
5 - Safety
Please read this manual carefully as it contains important safety information that the
operators need to know.
* WARNING* : The design and construction of this lift is only suitable for lifting whole
vehicle. All other uses are unauthorized, this lift CAN NOT be used to: wash vehicles,
build lifting platforms, lifting personnel, use as cargo lifts and use as lifting partial of
the vehicles.
5 . 1 Important Reminder: Personal and Equipment Safety
1 . During vehicle lifting process, operators should be at a safe position/ area.
2 . Turn off the vehicle engine and manual brake on.
3. Load vehicle correctly (Fig 13).
4 . The vehicle CAN NOT exceed the rated lifting capacity and required size.
5.2 Vehicle Position
Once the vehicle is raised, vehicle CAN NOT be moved backwards or forwards as it may
cause falling.
* WARNING* : Do not attempt to move the vehicle while it is parked on the lift.
Fig 13 correct way to load vehicle
Page 12 of 19