CentralPneumatic 68019 Посібник з налаштування та експлуатації - Сторінка 14
Переглянути онлайн або завантажити pdf Посібник з налаштування та експлуатації для Цвяходер. CentralPneumatic 68019. CentralPneumatic 68019 19 сторінок. 2-in-1 18 gauge nailer-stapler
Також для CentralPneumatic 68019: Посібник користувача (20 сторінок)
Друкувати сторінку
remove the Position Seat (54). Then pull
out of Fixed Magazine (52).
3.
Pull out the jammed fastener and the
remainder of the fastener strip that is
still in the magazine. Dispose of the
remaining fastener strip; it may be bent
or damaged in some other way.
4.
If a fastener is jammed in the Drive
Guide (40), pull out the Quick Release
Lever (44) and disengage the Quick
Release Spring (45).
5.
Remove the jammed fastener; pliers
maybe necessary to remove a stuck
fastener.
6.
Inspect the Drive Guide for any bends or
breakage. If it is damaged, do not use
the tool until it is repaired by a qualified
technician.
7.
Lightly oil the Drive Guide, engage the
Quick Release Spring, and snap the
Quick Release Lever back into place.
8.
Make sure that the Safety Tip moves
smoothly without binding.
9.
Reload the Nailer/Stapler and then
reconnect it to the air supply.
10. Press the Safety of the Nailer/Stapler
against an appropriate piece of scrap
wood.
11. Test fire the Nailer/Stapler several times,
checking for proper operation.
12. Disconnect the Nailer/Stapler, remove
the fasteners, and store in a location out
of children's reach.
13. If you are unable to clear the fastener
jam using the method prescribed above,
the tool should be taken to a qualified
service technician for proper servicing.
Page 14
For technical questions, please call 1-800-444-3353.
SKU 68019